Waste collection equipment TM-6

TM-6 is designed for mechanized and manual collection of solid waste and transporting them to the places of disposal or reloading area. The compact size of a garbage truck is a huge advantage in today's urban environments, cottage settlements, etc.

Compaction of waste is carried out by using pressing and ejector plates. Unloading of waste is carried out by the ejector plate.

Body: the frame body is made of shaped tubes; the inside of the roll cage built into the body of the spherical shape of steel resistant to deformations; sides, roof and bottom are of spherical shape, whose profile ensures even load distribution in the working cycle and the simplicity of the gathering of the liquid contained in the waste; the side walls and roof made of solid steel sheet STRENX; the bottom is made of wear resistant HARDOX 450.

Hopper: design the hopper is reinforced by ribs made of alloy steel; work surfaces of the plates, the wear edge of the rotary blade and the receiving hopper made of wear-resistant steel HARDOX 450; low loading height of the hopper allows to work manually; a sealing mechanism articulated, connecting rod, to prevent jamming of debris when the seal in the loading hopper; hydraulic cylinders drive the sealing plate placed inside the rear side; due to the shape of the hopper is no spillage beyond.

Ejector plate: plate movement is carried out along the guide rails by means of a telescopic double-acting hydraulic cylinder; uniform speed; easy disassembly and maintenance; optimal use of space inside the body; high capacity.


 
Main futures
high performance pressing mechanism allows to compress the waste volume 1.1 cubic meters per cycle, as a result saving time and fuel, which leads to the saving of working resource of the garbage truck
high compaction rate of 6:1
intelligent pressing garbage system
reduced weight of the structure due to the optimal layout of elements and new design decisions
partially robotic welding products
high build quality, reliability of components and assemblies, all loaded nodes are garbage collected using hardware strength not less than 10.9
download all kinds of containers with a volume of from 0.12 to 1.1 cubic meters, the ability to download manually
ergonomic and fast loading process
secure attachment of waste containers of the loading mechanism
easy maintenance
due to the precision fit of the sliding elements provides a smooth and fairly quiet operation of the truck
increase the service life of the sliding elements due to the use of wear-resistant materials and the construction of the sliding element
a good cleaning of hopper and through the use of sealing elements on the ejector plate
receiving hopper and the storage hopper (body) tight to each other, the resulting liquid flows directly into a hopper, where is the drain cock for draining the liquid
a high performance paint coating: 2-component primer and 2-component polyurethane enamel last generation